PLC sand making machine is a fine crusher, which adopts the methods of impacting, grinding and cutting. It is suitable for crushing and reshaping soft, medium hard and high hard ores and widely used for various ores, cement, fireproofing material, silicon carbide, bauxite chamotte, glass raw material and infrastructure construction stone, etc. The Crusher has excellent performance when used to crush silicon carbide, sintered bauxite, magnesite and other high hard and corrosion material.
Performance Parameter Table of PLC sand making machine
| Model & specification | Diameter Of Crushing | Power | Max feed Size | Rotating | Capacity | Remark | ||
Single Drive | Double Drive | Single Drive | Double Drive | |||||
PLC2100K-ST | 85"(2195) | 250 | 200X2 | 3 1/2"（89mm） | 800-1400 | 100-300 | 100-400 | ROR |
PLC2100B-ST | 85"(2195) | 250 | 160X2 | 1 1/2"(38mm) | 800-1800 | 110-245 | 120-295 | ROS |
PLC2100B-SS | 85"(2195) | 220 | 160X2 | 2"(51mm) | 800-1800 | 140-260 | 150-270 | SOS |
PLC2400K-ST | 95"(2413) | 315 | 250X2 | 5"(127mm) | 800-1300 | 100-296 | 100-490 | ROR |
PLC2400B-ST | 95"(2413) | 315 | 250X2 | 2 1/2"(64mm) | 800-1800 | 105-350 | 175-590 | ROS |
PLC2400B-SS | 95"(2413) | 315 | 250X2 | 2 1/2"(64mm) | 800-1800 | 150-350 | 215-450 | SOS |
Note: The above parameters for reference only, the actual production capacity are based on the type of material and production conditions
Working principle of PLC sand making machine
Our Sand Making Machine is especially efficient to crush harder and causticity materials, such as carborundum, emery, and magnesium sand. Zenith B Series Sand Making Machine is one of the most advanced impact crushers nowadays. It introduces high quality roller bearings, which ensure the smooth running of main unit. Personalized design is used in upper cap, sand making machine is easy and convenient to maintain and replace spare parts. Sand Making Machine is our sole patent using central feeding & central cascade feeding, which can be changed based on customers' needs.
The sand making machine equipment lets materials fall into the crusher and are divided into two parts. One part goes into the high-speed-running impeller of the machine, and the other part goes around the impeller. The two parts materials bump and crush fast during the effect of centrifugal force.Then the materials run like swirl, bump and rub to each other again and again.The finished products go out from the bottom of the machine, and users can get the requested products size after screening by vibrating screen.
Features of PLC sand making machine:
1. The structure is simple, and the operating cost is low.
2. High efficiency, and low consumption.
3. Sand Making Machine is slightly influenced by the humidity of material, and the max humidity is 8%.
4. Sand Making Machine is more suitable for crushing mid-hardness materials and high-hardness materials.
5. Its product is cubic, and the density of piling up is high and the iron pollution is low.6. The working noise is less than 75 decibels and dust pollution is little.
Our Services:
Pre-sale services: enthusiasm
We provide you with the process plan, process flow design and manufacturer equipment according to your special demand.
Sale services: servant
Send technicians to the job site for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
In addition, we provide one-year warranty to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.