Hydraulic Gyratory Crusher

Hydraulic Gyratory Crusher

Compared with jaw crusher, hydraulic gyratory crusher product size if uniform, wearing of crushing wall is small, operating rate is high and production capacity can reach up to 3-4 times. Since the direct turning mode is adopted for feeding, such production facilities as storage bin for raw ore...

Product Details

 Compared with jaw crusher, hydraulic gyratory crusher product size if uniform, wearing of crushing wall is small, operating rate is high and production capacity can reach up to 3-4 times. Since the direct turning mode is adopted for feeding, such production facilities as storage bin for raw ore and ore feeder can be omitted during coarse crushing of crushing production technology. it is the preferred typical equipment for large and medium sized mines and other industries for coarse crushing of various hard materials.

Generally, the hydraulic gyratory crusher is produced to install the hydraulic device on lower part of its base to support the crushing cones. The safe insurance of crusher and adjustment of ore discharging mouth are realized by utilizing the hydraulic energy storage system. The unreliability of safety devices of original suspension shaft type gyratory crusher and shortage of troublesome adjustment of ore discharging mouth can be overcome to bring new life to the gyratory crusher.


Performance Parameter Table of Hydraulic Gyratory Crusher


     Model & Specification

Size Of Feed Port
   
mm

Recommend Maximum Size Of Feed Port
   
mm

Minimum Discharge Port Size
   
mm

Discharge Outlet Adjustment Range
   
mm

Moving Cone Bottom Diameter
   
mm

Production Capacity
   
t/h

Motor Power
   
Kw

pxz0506

500

420

60

60-90

1200

140-250

155

pxz0710

700

580

100

100-130

1400

310-400

180

pxz0913

900

750

130

130-160

1650

600-1000

280

pxz1216

1200

1000

160

160-190

2000

1200-1500

400

pxz1417

1400

1200

170

170-200

2200

1500-2500

500

pxz1417A

1400

1200

170

170-220

2200

2750-3300

560

pxz6089

1524

1300

178

178-200

2260

3000-3500

560

pxz6393

1600

1350

190

190-215

2360

3700-4500

800

Note: The above parameters for reference only, the actual production capacity are based on the type of material and production conditions


Features & Advantages of hydraulic gyratory crusher
 1.Deep Crushing Chamber,Continuous Work, High Production Capacity,Low Power Consumption
 2.Relatively Stable Running,Light Vibration
 3.Feed Materials Itself Without Additional Ore Bin And Feeder
 4.Gyratory Crusher is Easy to Start
 5.The Sheet Product of Gyrating Crusher is Less Than That of Jaw Crusher
 6.High Efficience,Long Life Span,Easy Maintenance,Wide Application


Structure of hydraulic gyratory crusher
 1. Equipment adopts inblock cast frame with long service life and higher reliability. 
 2. Cone crusher with hydraulic adjustment of both institutions, to facilitate rapid adjustment of cone crusher nesting population size.
 3. This equipment has the function of hydraulic insurance and clearing, which makes it more reliable and time saving.
 4. This equipment uses automatic and intelligent controlling system, integral hydraulic system of lubrication.

hydraulic gyratory crusher Working Principle:

When working the rotation of the motor through pulley or coupling, drive shaft and the conical portion of the eccentric force moving around the circle next to a fixed point for rotating pendulum movement, so that the cone crusher crushing wall sometimes near and sometimes off the solid adjustment sleeve mounted on rolling acetabular wall surface, the ore in the crushing cavity constantly under attack, pressing and bending and crushing ore. 
 
 Bevel gear drive motor through eccentric rotation, so crushing cone make swing movement. crushing cone sometimes close and sometimes away from the fixed cone, to complete the crushing and nesting. Support sleeve and frame body connection is pressed by spring, when the piece of metal and other objects which can not be broken fall within the crusher , compressive deformation of the spring discharge foreign objects, to achieve safety and prevent damage to the machine.

 

Our Services:
 Pre-sale services: enthusiasm
 We provide you with the process plan, process flow design and manufacturer equipment according to your special demand.
 Sale services: servant 

 Send technicians to the job site for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
 After-sale services: faithfulness 

 To establish long term friendship, we will regularly pay return visit to customers.
 In addition, we provide one-year warranty to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

Inquiry