The Operation Of The Grinding Machine

- Aug 11, 2017-

Empty load Commissioning. The mainframe and the analyzer are turning right. Host air load Commissioning according to the steering requirements, its operating time is not less than 1h. When the host air load is running, the mill roller device should be tied with the wire rope to avoid the grinding roller and the grinding ring contact blow, such as unconditional, can also remove the mill roller device. Host air load commissioning should be stable, the maximum temperature of lubricating oil should not exceed 800c. Temperature rise shall not exceed 400c. 


Analysis machine Size bevel gear should be smooth operation, all normal sound, and ensure that the circuit is unblocked. Blower should observe the direction of rotation, should not be abnormal sound and vibration, rolling bearing maximum temperature should not exceed 700c, temperature rise does not exceed 350c. Meet commissioning. It is proved by the empty load commissioning that all parts can be carried out in accordance with the commissioning operation. 


The commissioning time is not less than 8h (hours). Mill work should be normal, the transmission part must not have abnormal sound and impact vibration. The maximum temperature of rolling bearing and lubricating oil is not more than 800c, and temperature rise is not more than 400c. There should be no air leakage in the flange contact of the piping device. The mill output reaches the specified index. Adjust the speed of the analyzer, so that the finished grain size control in 0.44-0.125mm range. After the air load and the load make the operation qualified again, tighten the fastener tightly, can put into normal operation.