Main Points Of Mine Equipment Maintenance

- Aug 11, 2017-

1, bearing the full load of the machine, so good lubrication on the bearing life has a great relationship, it directly affects the service life and operating rate of the machine, so the injected lubricating oil must be clean, the seal must be good, the main oil injection Department (1) rotating bearing (2) roller bearing (3) All Gears (4) Active bearings, sliding plane.


2, the new installation of the tyre easy to loose must be frequently inspected.


3, pay attention to the work of all parts of the machine is normal.


4, pay attention to check the wear degree of wearing parts, at any time pay attention to the replacement of worn parts.


5. The base plane of the movable device should be out of the dust and so on lest the machine meet the material that can not be broken, the movable bearing cannot move on the base plate, resulting in serious accident.


6, the bearing oil temperature rises, should immediately stop the inspection reason to eliminate.

7, rotating gear in operation if the impact sound should be immediately stopped inspection, and eliminate